Filters
By Brand
-
OTC Tools & Equipment 1110 18 in. Push Puller Legs
OTC Tools & Equipment 1110. . Features: Extra legs for OTC No. 938 17-1/2-Ton Push-Puller and No. 1062 and 1063 17-1/2-Ton Capacity Hydrualic Pullers. Leg Length 18 in., equals leg length plus 2 in.with leg end caps.
MPN: 45407807
-
OTC Tools & Equipment OTC-4581-2 Blind Hole Puller Assembly
FeaturesReplacement collet / pin assembly blind hole bearing puller setSize - 0.75 in.2 Pieces- SKU: MED46263
MPN: 702954753
-
OTC Tools & Equipment 5190A Heavy Duty U-Joint Puller
OTC Tools & Equipment 5190A. . Features: Compatible with Spicer 1610, 1710, 1760, 1810, 1880; Spicer SPL 140, 170, 250 Life Series; and Meritor 16N, 17N, 18N, 1710, RPL 20, and 25 Permalube Series. Smoother thread allows for a lower, more consistent effort to rotate shaft. Major tool components are heat treated for improved strength and durability. Disassemble and reassemble U-joint cups without heat or hammering....
MPN: 16481365
-
OTC Tools & Equipment 6574 Universal Hub Puller HD with Plate
OTC Tools & Equipment 6574. . Features: Ideal for frozen hubs, axle shafts, and other tough pulling applications. Adjustable sliding puller legs can be positioned anywhere on the puller center hub for a true universal fit on wheel hubs with 5 - 8 in.+ bolt circle. Pulling plate allows for quick attachment and an even pull on the popular five bolt hubs with 4 - 5 in. bolt circles. Forged puller assembly coupled with a 1 in. drive screw capable of 20 tons of force. Drive screw approved for use with an imp...
MPN: 29374119
-
OTC Tools & Equipment 7588A Ford 4WD Caster/Camber Sleeve Puller
OTC Tools & Equipment 7588A. . Features: 1980-current full-size E- and F-series vans and pickups and Broncos. 1983-89 Ranger and Bronco II. Two horseshoe adapters are included to pull most aftermarket bushings with removable retaining rings. Rusted or seized bushings are no match for this puller....
MPN: 16902100
-
OTC Tools & Equipment OTC-1110 Puller Leg Set-18 inch Long
Features18 inches longReach equals leg length plus 2-5/8 inches with leg end capsExtra pair of legs for the OTC 939 Push-Puller- SKU: MED44238
MPN: 48425641
-
OTC Tools & Equipment 1176 2.5 lbs. Reversible Jaw Slide Hammer Puller
OTC Tools & Equipment 1176. . Features: 2.5 lbs. hammer at 27 in. long.. 2-Jaw Spread 1-1/4 in. to 3-1/2 in. and outside 1 in. to 4-1/2 in.. 3-Jaw Spread: Inside 1-1/2 in. to 4-1/4 in. and outside 1-1/2 in. to 4-1/2 in..
MPN: 17018419
-
OTC Tools & Equipment 927 10-Ton Push Puller
OTC Tools & Equipment 927. . Features: Removes and installs press-fit parts. Can be used with OTC-1123 bearing pulling attachment. Can be used with OTC-679 pulley pulling attachment. Can also be used with OTC-1150, OTC-1151, OTC-1152 or OTC-1153 internal pulling attachments. Maximum 8-1/4 in. reach with 2-1/8 in. to 7-1/4 in. spread capacity....
MPN: 16481255
-
OTC Tools & Equipment 7319 Pilot Bearing Puller
OTC Tools & Equipment 7319. . Features: Manufactured from premium materials. Designed to strict quality standards. Will last a lifetime. 7/8 in. to 2 in. capacity.
MPN: 16481286
-
OTC Tools & Equipment 938 17-1/2-Ton Push Puller
OTC Tools & Equipment 938. . Features: Removes and installs press-fit parts. Can be used with OTC-1124 or 1130 bearing pulling attachments. Can be used with OTC-679 and 680 pulley pulling attachments. Can also be used with OTC-1150, 1151, 1153, 1165 or 1166 internal pulling attachments. Maximum 11-1/2 in. reach with 3-1/8 in. to 11-3/4 in. spread capacity....
MPN: 16481249
-
OTC Tools & Equipment 7121 Fuel Injector Nozzle Puller
OTC Tools & Equipment 7121. . Features: Designed to remove the pencil-type fuel injector nozzles used in many agricultural and construction engines. The slide hammer action gives a straight, even pull without damaging components. Works on Case, Caterpillar, GM, John Deere, Waukesha, and White diesel engines....
MPN: 16915117
-
OTC Tools & Equipment 6290A Front Hub Puller for 4WD Vehicles
OTC Tools & Equipment 6290A. . Features: For removal of the front hub assembly, necessary for wheel bearing or brake rotor service. Provides the mechanical advantage and straight pull not possible with a slide hammer. Will not work on trucks with dual rear wheels. Services 1988-2014 GM 1/2-ton, 3/4-ton, and 1-ton trucks, Tahoe, Suburban, and Yukon; 1994-2014 Dodge 3/4-ton and 1-ton Ram trucks; and 1998-2014 Ford 3/4-ton and 1-ton trucks, Excursion....
MPN: 34057568
$147.93