AvidMax.com
Compare the best AvidMax.com prices on PriceReel. Featuring the Bike Tools & Maintenance from top brands such as Park Tool
-
Park Tool BTR-1 Tool Roll Emergency Bike Repair Pouch
Ride saving essentials in a tight tool roll, perfect for just about any rider. The BTR-1 features the essential tools needed to fix a flat and make trail or roadside adjustments - all wrapped in a well-organized, protective tool roll. Just the right size to slide into most medium to large sized saddle bags and wedge packs. The BTR-1 includes the following:PMP-3 Pocket Protector Micro PumpIB-1 I-Beam Fold-up tool setGP-2 Pre-Glued Patch KitTL-4 Tire Lever SetTB-2 Emergency Tire Boot...
MPN: 6d239338d9e93afeb088ed7d9a7e0be8
-
Park Tool BX-2 Blue Sturdy Anodized Aluminum Bike Tool Case
The BX-2 uses a super tough HDPE plastic shell that is nearly indestructible. This is a professional-level lockable travel tool case customized to work specifically with bicycle tools. Each specially designed tool pallet is housed in a super tough, dent proof tool case designed and built for daily use.Dent proof molded composite shellStrong anodized aluminum frame35 tool pockets and straps plus four universal tool modulesCustomizable lower level with moveable partitionsRemovable tool boards made with tough ...
MPN: 16e3c904012c888f9a3a6568c1552b69
-
Park Tool CG-2.2 Bike Chain Cleaning System with Brush and Cleaning Fluid
A dirty drivetrain causes poor shifting and unnecessary wear to expensive parts. The Park Tool Chain Gang Cleaning System contains everything needed to quickly and easily clean the chain, freewheel cogs, and chainrings. The CG-2.2 works on all derailleur bikes and many 3-speed and coaster brake bikes.Includes: (1) CM-5.2 Chain Scrubber, (1) GSC-1 GearClean Brush, (1) 8oz. bottle of CB-2 Citrus Chain Brite fluidCompatible with all chain sizes that fit a derailleurPrevents poor shifting and excess wear from d...
MPN: 617e1f984fa84bf1a2a18a70610a0278
-
Park Tool CBW-1 Metric Wrench for Bike Shop Repair
These small, nickel plated wrenches can be used on brakes, derailleurs, etc. The CBW wrenches are nominally 1/8 in. (3.2mm) thick.8mm open end10mm open endPerfect for adjusting brakes and derailleursNominally 0.125 inches thickNickel-plated quality Park Tool construction...
MPN: eb1daa0c1e56c1c7c56019dc0847afb0
-
Park Tool CBW-4 Metric Bike Repair Wrench 9mm and 11mm
These small, nickel plated wrenches can be used on brakes, derailleurs, etc. The CBW-4 wrench is nominally 1/8-inch (3.2mm) thick.Contains a 9mm endContains an 11mm endNickel-plated wrenchExcellent for use on derailleurs, brakes, etc.Width: nominally 0.124 inches (32mm) thick...
MPN: 0d2867f7aefd92e7f0a9076730673e1e
-
Park Tool CC-2 Bike Chain Checker/Wear Gauge
To alleviate poor shifting and uneven drive train wear, manufacturers recommend chain replacement before rear cog replacement. Now you can quickly and accurately determine the wear and stretch of any chain with the Park Tool Chain Checker. Simply insert the Chain Checker's pins into two links, press the swing arm gauge tight, and then check the gauge window for an accurate reading.The CC-2 is 10- and 11-speed compatible. For the modern 9 and 10-speed chains, replace chain at or just before the 0.75% reading...
MPN: a698fda38c61b27c5624e426b4a9c8c2
-
Park Tool CC-3.2 Bike Chain Wear Indicator Gauge
A worn chain shifts poorly and wears sprockets at an accelerated rate. The CC-3.2 is a ""go no-go"" gauge designed to accurately indicate when a chain reaches .5% and .75%, the points at which most chain manufacturers suggest replacement. The updated CC-3.2 is longer, more accurate and features permanent measurement markings.Indicates when a chain reaches 50% or 75% of its lifetime wearHelps prevents excess chain wear and resulting sprocket wearUpdated to be longer and more accurateFeatures permanent measur...
MPN: 0cb2aa7434aec917dda4260292b474c3
-
Park Tool CN-10 Professional Bike Cable and Housing Cutter
The Park Tool CN-10 Cable and Housing Cutter is a shop quality cutter designed specifically for use on all bicycle cables and housing, including hard-to-cut index housing.Cold forged heat treated steel handles for strengthPrecision ground cutting jaws for a clean cut on every cableTrusted, sturdy Park Tool qualityBuilt in crimper for cable end caps and forming hole for reforming housing ends and housing ferrulesWire latch holds handles together when not in use...
MPN: 09d56c9f3397d49581cc122164d54d7c
-
Park Tool CNW-2 Bike Chainring Nut and Bolt Removal Wrench
The CNW-2 makes chainring bolt set installation and removal easy. It securely holds the slotted nut to prevent spinning when tightening or loosening the bolt. Double-ended to fit most slotted-type nuts.The outer width of both ends of the CNW-2 are nominally 12mm wide. One end has a two outer tips nominally 2.7mm wide each, and the other end has tips of 3.8mm each. The blade thickness is nominally 1.35mm.Tool designed to hold the slotted chainring nut preventing slippageFits most slotted-type nutsOuter width...
MPN: 9e19ba11c1c348acf75b84544df5d42b
-
Park Tool CRP-2 Adjustable Bike Crown Race Puller Remover
The CRP-2 is a precision tool for quickly and easily removing the headset crown race from the crown race seat. New for 2013, the tool is fully adjustable, allowing precise and independent positioning of the blades around the crown race. Locating each blade independently provides flexibility to fit around most potential interferences with fork top caps or crown protrusions.Note: Blades are necessarily thin and will wear with use. Crown races with a tight press fit may also wear on blades. Replacement blades ...
MPN: 6a72964e59596af9da39684124e4fca7
-
Park Tool CRC-1 Bike Fork Crown Race Seat Fork Cutting Tool
To ensure proper headset performance and longevity, special attention must be given to accurately machine the fork's crown race seat. The CRC-1 is a professional quality machining tool for milling both the outer edge and lower surfaces of the crown race seat.High speed steel cutters and adjustable collets to machine 26.5mm and 27.1mm crown race seats on 1-inch forks, and 30.1mm crown race seats on 1-1/8 inch forksUnique adjusting system allows a tight fit of the tool on any fork threaded or unthreadedSmooth...
MPN: c460f95149ebe455dbf136ef7d4deb0a
-
Park Tool CRS-1 Bike Crown Race Ring Setter
The CRS-1 offers six inserts with to install the fork crown race. The bearing surface is spared a direct hit by using different inserts to ensure proper fit on the race. Choose the correct insert then slide the tube over the fork tube and into the top end of the insert. Using a hammer, tap firmly on the end cap of the tube and seat the race into its proper place safely and accurately. The CRS-1 set includes one universal setting tube, three 1-in. inserts, and three 1.124-inch inserts. The CRS-1 will work on...
MPN: 41607163e90186a5f14b4e0dccf756f8
$53.54