By Brand
-
Park Tool CNW-2 Bike Chainring Nut and Bolt Removal Wrench
The CNW-2 makes chainring bolt set installation and removal easy. It securely holds the slotted nut to prevent spinning when tightening or loosening the bolt. Double-ended to fit most slotted-type nuts.The outer width of both ends of the CNW-2 are nominally 12mm wide. One end has a two outer tips nominally 2.7mm wide each, and the other end has tips of 3.8mm each. The blade thickness is nominally 1.35mm.Tool designed to hold the slotted chainring nut preventing slippageFits most slotted-type nutsOuter width...
MPN: 9e19ba11c1c348acf75b84544df5d42b
-
Park Tool CRP-2 Adjustable Bike Crown Race Puller Remover
The CRP-2 is a precision tool for quickly and easily removing the headset crown race from the crown race seat. New for 2013, the tool is fully adjustable, allowing precise and independent positioning of the blades around the crown race. Locating each blade independently provides flexibility to fit around most potential interferences with fork top caps or crown protrusions.Note: Blades are necessarily thin and will wear with use. Crown races with a tight press fit may also wear on blades. Replacement blades ...
MPN: 6a72964e59596af9da39684124e4fca7
-
Park Tool CRC-1 Bike Fork Crown Race Seat Fork Cutting Tool
To ensure proper headset performance and longevity, special attention must be given to accurately machine the fork's crown race seat. The CRC-1 is a professional quality machining tool for milling both the outer edge and lower surfaces of the crown race seat.High speed steel cutters and adjustable collets to machine 26.5mm and 27.1mm crown race seats on 1-inch forks, and 30.1mm crown race seats on 1-1/8 inch forksUnique adjusting system allows a tight fit of the tool on any fork threaded or unthreadedSmooth...
MPN: c460f95149ebe455dbf136ef7d4deb0a
-
Park Tool CRS-1 Bike Crown Race Ring Setter
The CRS-1 offers six inserts with to install the fork crown race. The bearing surface is spared a direct hit by using different inserts to ensure proper fit on the race. Choose the correct insert then slide the tube over the fork tube and into the top end of the insert. Using a hammer, tap firmly on the end cap of the tube and seat the race into its proper place safely and accurately. The CRS-1 set includes one universal setting tube, three 1-in. inserts, and three 1.124-inch inserts. The CRS-1 will work on...
MPN: 41607163e90186a5f14b4e0dccf756f8
-
Park Tool CTP-4k Replacement Bike Chain Tool Pin Kit for CT-4.3,4,11
The Park Tool CTP-4K Replacement Chain Tool Pin Kit includes four (4) replacement chain tool pins and one 5/32"" ball bearing. To replace the chain tool pin, unscrew the cap, and pull out the old pin. Use care not to lose the ball bearing beneath the pin. Install the new pin and replace the cap.Works only with the CT-4.3, CT-4.2, CT-4, and CT-11Includes four replacement chain tool pins and one 5/32 in. ball bearingWorks only with the CT-4.3 and CT-11 chain toolsEasily replace the chain tool pin by unscrewin...
MPN: 32c1fc94616442e524f73d8540b4012f
-
Park Tool CT-11 Bike Chain Rivet Peening Tool for Campagnolo 11-Speed
After pressing the special connecting rivet into a Campagnolo 11-Speed Chain and breaking off the pilot, Campagnolo requires the end of the connecting rivet to be ""peened"" or ""deformed"" to prevent chain failure. The precision-machined CT-11 is used to accurately perform this critical process.Note: The CT-11 will not install or remove chain rivets. Its sole function is to peen and secure the end of the Campagnolo 11-speed connecting rivet. The Park Tool CT-4.2 Master Chain Tool (or previous model CT-4) i...
MPN: 1c4cc549544ae5f88a54ef55c9cb00d6
-
Park Tool CT-4.3 Master Bike Chain Repair Tool with Anvil
Specially designed to work with the tight tolerances and narrow profiles of 10- and 11-speed chains, but also works on all other derailleur chains, including the Shimano CN-9000. The CT-4.3 is a powerful, precise tool designed to quickly and accurately remove and install chain rivets. Without a doubt the most accurate chain tool we've ever built! Note: The CT-4.3 is NOT compatible with Wipperman chains.Integrated Link Pocket ensures precise alignmentReplaceable rotating pin (see the CTP-C) Perfectly contour...
MPN: 8a604c1662a9f00f0faac0ee316a5891
-
Park Tool CT-6.3 Folding Bike Chain Repair Tool with Anvil
Now 11-speed compatible, the CT-6.3 removes and installs chain pins in all derailleur chains. Smooth and powerful, this handy take along is encased in a stainless steel shell, which becomes a comfortable handle when opened. Also included is a peening anvil that allows for peening of Campagnolo 11-speed chains, and which pivots out of the way when not in use. Cast steel body with stainless steel caseReplaceable pin available from Park Tool (part #985-1) Works on 5- to 11-speed derailleur chainsFoldable peeni...
MPN: b90ade5a5dd3a3cf8b6664c2f592c844
-
Park Tool DT-1.2 Disc Tab Mount Facing Bike Fork Tool
In order to ensure disc brakes function smoothly and accurately, the frame's mounting tabs must be parallel with the brake pads and rotor. The Park Tool DT-1.2 Disc Tab Mount Facing Tool is designed to perfectly machine the face of each tab, removing paint and material to create a flat surface. Comes with 15mm, 75mm, and 135mm through axle adapters.Works on forks with 100mm open dropouts and closed dropouts with 20mm through axlesWorks on 135mm open dropoutsWorks on frames with closed dropouts using 12mm th...
MPN: 2306afcc1c1078c467fad567917242b2
-
Park Tool DT-2 Bike Rotor Truing Adjustment Repair Fork
Specially designed, and precisely manufactured to gently adjust bent or damaged brake rotors. Each DT-2 features two different slot depths laser cut from high quality steel. Centered handle is vinyl dipped for comfort.Use to gently adjust rotor faceFeatures 2 different slot depths for various rotor diametersLaser cut from high-quality steelVinyl-dipped handle for comfort and gripAfter using consider the Rotor Truing Gauge DT-3 to ensure straightness...
MPN: 00180e38b5bc3e3332546bed60575d6f
-
Park Tool DT-3 Bike Rotor Truing Adjustment Gauge
Accurately gauge the straightness of disc brake rotors while the wheel is mounted in a TS-2.2 or TS-2 Professional Wheel Truing Stand. The DT-3 features an infinitely adjustable, finely threaded indicator gauge. Works with any diameter brake rotor.Excellent for use with a professional truing standFeatures an infinitely adjustable indicator gaugeWorks with brake rotors of any diameterGauges straightness of disc brake rotorsUse with the Rotor Truing Fork for best results...
MPN: 9f448f92dcd6820b20baaed64f5a26d3
-
Park Tool ES-1 Display Stand Event Bike Holder
The ES-1 is a versatile, stable, multi-purpose storage rack built to hold up to twelve bikes by the nose of the saddle. Perfect for events, races or sidewalk storage, the ES-1 disassembles and folds easily for compact storage. Includes two height adjustable tripod uprights, two 47 in. (119cm) support tubes, and one connector sleeve. The ES-1 is approximately eight feet long but can be extended in length with the use of ES-2 Event Stand Add on Kits.The ES-1 adjusts from 94cm to 120cm (37 in.-47 in.) Inside t...
MPN: ceedb3a616cd07061f1721845b1a058a
$5.95