-
SP Tools 96800 Universal Camshaft Pulley Holding Tool
Schley Products was founded in 1979 for the sole purpose of manufacturing specialty tools for the automotive aftermarket. From the start Schley Products philosophy has been to produce economical tools of the highest quality and standards which make a previously difficult task now easy to accomplish. FeaturesDesigned with grooved pins to hold the camshaft pulley stationary while loosening and tightening the center shaft boltFor use with many OHC cam enginesVery useful on many Asian import engines, especially...
MPN: d0f165bbd73f430aff61123fb646f903
-
SP Tools 96800 Universal Camshaft Pulley Holding Tool
Universal Camshaft Pulley Holding Tool - 96800. Designed with grooved pins to hold the camshaft pulley stationary while loosening and tightening the center shaft bolt. For use with many OHC cam engines. Very useful on many Asian import engines, especially transverse mounted V6 motors such as the Nissan VG30 in Maximas, as well as the Toyota 3VZFE and IMZFE used in Camrys. Rear pulleys on these models are in very close proximity to the shock tower making removal and replacement difficult without this locking...
MPN: d0f165bbd73f430aff61123fb646f903
-
Sp Tools 65550 Gm Oil Pump Drive Removal Tool
This special tool has been designed to easily remove the oil pump drive on most g.M. V-6 eniges with the intake manifold still attached to the engine block and cylinder heads. The oil pump drive is located in a very small area that is surrounded by the intake manifold and other obstructions. With this remover, the job is done easily and quickly. this tools will save 1/2 hour per job. Works on these g.M. Engines: 2.8l v-6 1987-1989 3.1l v-6 1990-1994 3100 v-6 1994-2005 3.4l v-6 1999 and later...
MPN: b47ff651ec3103da722a91d2a81768b3
$62.99